MAX Technologies’ IPM mezzanine modules are available for MIL-STD-1553, ARINC 429, ARINC 561, ARINC 568, ARINC 629, ARINC 708, ARINC 717, ASYNC RS-232/422/485, CSDB, ASCB, HDLC/SDLC, Pulse/Frequency generator, Analog, Single and Differential Discrete I/O and more.
The IPM modules are compatible with the MAX Technologies’ PCI-400, PCI-400-2, PXI-400, CPCI-400, MAXPCIe 502 and MAXPXIe 500 carrier boards.
MULTI PROTOCOLS
- • Channels class selectable as:
- ✓ ARINC-429
- ✓ ARINC-717 Flight Data Recorder
- ✓ SERIAL ASYNC
- ✓ CSDB
- ✓ SYNCHRONOUS HDLC/SDLC
- ✓ FREQUENCY/PULSE GENERATOR
- • Variable differential voltage, DC offset, and slew rate. Programmable to meet ARINC 429, RS-422, RS-485, RS-232 electrical interface
- • Configurable data rate per channel up to 4 Mbps
- • Separate 512 byte FIFO for each receive and transmit channel
- • 32-bit microsecond timetag on received data
- • 24-bit microsecond timetag scheduling of transmitted data
- • Precision of one microsecond
- • Channel independent configuration and operation
- • Parity error and word length error injection and detection
- • IRIG-B signal input
- • 8 independently configurable discrete I/O lines (DIO)
- • Reliability MTBF (MIL-HDBK-217 FN2, 30 °C) 1,153,800 hours
- • Standard Operating Temperature: 0°C to 70°C
- • Relative Humidity for operation: 0 to 95% (non-condensing)
IPM-MULTI
REQUEST A QUOTE
Part Number
IPM-MULTI Description
MAX-IP-200141
8TX+8RX, PARAMETRIC, 8 DISCRETE, ERROR INJECTION, PROG. VOLTAGE/SLOPE/THRESHOLD, IRIG-B INPUT, PROTOCOLS: SERIAL ASYNC RS-232/422/485, CSDB, PULSE/FREQ. GENENATOR
MAX-IP-200142
ORDERING INFORMATIONS
MAX-IP-200140
8TX+8RX, PARAMETRIC, 8 DISCRETE, ERROR INJECTION, PROG. VOLTAGE/SLOPE/THRESHOLD, IRIG-B INPUT, PROTOCOLS: ARINC 429, PULSE/FREQ. GENENATOR
8TX+8RX, PARAMETRIC, 8 DISCRETE, ERROR INJECTION, PROG. VOLTAGE/SLOPE/THRESHOLD, IRIG-B INPUT, PROTOCOLS: ARINC 429, ARINC 717, SERIAL ASYNC RS-232/422/485, CSDB, PULSE/FREQ. GENENATOR
MAX-IP-200144
8TX+8RX, PARAMETRIC, 8 DISCRETE, ERROR INJECTION, PROG. VOLTAGE/SLOPE/THRESHOLD, IRIG-B INPUT, PROTOCOLS: HDLC/SDLC, SERIAL ASYNC RS-232/422/485, CSDB, PULSE/FREQ. GENENATOR
MAX-IP-200146
8TX+8RX, PARAMETRIC, 8 DISCRETE, ERROR INJECTION, PROG. VOLTAGE/SLOPE/THRESHOLD, IRIG-B INPUT, PROTOCOLS: ARINC 429 / 717, HDLC/SDLC, CSDB, SERIAL ASYNC RS-232/422/485, CSDB, PULSE/FREQ. GENENATOR
ARINC 429
- • Up to 16 ARINC 429 channels
- • Two configurable data rate generators per channel between 3900 bps and 125 kbps
- • 32 ARINC 429 word FIFO
- • Label Selection and Word Filtering
- • Selectable 25 or 32-bit word length
- • Precision of one microsecond
- • IRIG-B AM, Digital and 1-PPS inputs
- • Complete independent channel configuration and operation
- • Parity Error and Short Word Error injection and detection
- • 8 Discrete lines (DIO) independently configurable to Input/Output
- • Short circuit protection on transmitters
- • ELB Version: Provides automatic external loopback verification on transmitters
- • Standard ARINC-429 Voltage Level:
- • Receive: ±6.5 to ±13V & ±2.5V (Null)
- • Transmit: ±10V & 0V
- • Reliability MTBF (MIL-HDBK-217 FN2, 30 °C) 584,200 hours
- • Standard Operating Temperature: 0°C to 70°C
- • Relative Humidity for operation: 0 to 95% (non-condensing)
IPM-429
IPM-429-ELB
REQUEST A QUOTE
Part Number
IPM-429 Description
MAX-IP-200110
4TX+4RX, 8 DISCRETE, ERROR INJECTION/ DETECTION, IRIG-B
MAX-IP-200109
8TX+8RX, 8 DISCRETE, ERROR INJECTION/ DETECTION, IRIG-8
MAX-IP-200101
16RX, 8 DISCRETE, ERROR INJECTION/ DETECTION, IRIG-B
MAX-IP-200105
16TX, 8 DISCRETE, ERROR INJECTION/ DETECTION, IRIG-B
Part Number
IPM-429-ELB Description
MAX-IP-200805
16TX, 8 DISCRETE, ERROR INJECTION/ DETECTION, TX LOOPBACK VERIFICATION, IRIG-B
MAX-IP-200807
8TX, 8 DISCRETE, ERROR INJECTION/ DETECTION, TX LOOPBACK VERIFICATION, IRIG-B
MAX-IP-200810
4TX+4RX, 8 DISCRETE, ERROR INJECTION/ DETECTION, TX LOOPBACK VERIFICATION, IRIG-B
ARINC 629
- • Can emulate up to 120 Remote Terminals (RT) with programmable CID per RT and on a per-message basis.
- • Error Injection (Parity, CRC and FC errors)
- • Error Detection (Parity, CRC and Manchester errors)
- • Supports all normal modes in transmission and reception (periodic, aperiodic, C, block, independent, alternate)
- • XPP configuration
- • 32-bit bus time-stamp on transmitted and received words
- • Full bus monitoring with 32 KB of FIFO (per word or message time-tag)
- • Programmable TI, TG and SG
- • Transmit/Receive Speed: 2 Mbps
- • IRIG-B AM, Digital and 1-PPS inputs
- • Reliability MTBF (MIL-HDBK-217 FN2, 30 °C) 527,675 hours
- • Standard Operating Temperature: 0°C to 70°C
- • Relative Humidity for operation: 0 to 95% (non-condensing)
IPM-629
Part Number
MAX-IP-200161[-A -B]
IPM-629 Description
IPM-629-MRT, 120 Terminals, 8 DISCRETE I/O, ERR INJ, IRIG-B
REQUEST A QUOTE
-A Option
SERIAL INTERFACE MODULE (SIM)
-B Option
ON-BOARD DC-DC 15V SUPPLY
ARINC 708 Weather Radar
- • ARINC 708 weather radar protocol support
- • Two independent transmit and receive channels
- • Microsecond precise Tx and Rx timetags
- • Internal loopback capability
- • Error injection and detection (sync, bit rate, Manchester, and word length)
- • 16 Discrete I/O lines
- • 256 word Tx FIFO and 1024 word Rx FIFO
- • IRIG-B AM, Digital and 1-PPS inputs
- • Reliability MTBF (MIL-HDBK-217 FN2, 30 °C) 605,075 hours
- • Standard Operating Temperature: 0°C to 70°C
- • Relative Humidity for operation: 0 to 95% (non-condensing)
IPM-708
Part Number
MAX-IP-200850
IPM-708 Description
PM-708, 1TX-1RX, 16 DISCRETE, ERR INJ, IRIG-B
REQUEST A QUOTE
MAX-IP-200851
PM-708, 2TX-2RX, 16 DISCRETE, ERR INJ, IRIG-B
MIL-STD-1553
- • MIL-STD-1553 A/B
- • IRIG-B AM, Digital and 1-PPS inputs
- • 16 general-purpose discrete I/O
- • One or Two dual redundant channels provide simultaneous support of 62-RT, 2-BC and 2-BM
- • Microsecond precise Tx and Rx timetags
- • Error injection and detection (sync, Manchester, and parity)
- • Includes variable voltage 1553 transceivers
- • Optional EBR (10 Mbps over RS-485)
- • Optional MIL-STD-1760 CRC
- • Reliability MTBF (MIL-HDBK-217 FN2, 30 °C) 527,675 hours
- • Standard Operating Temperature: 0°C to 70°C
- • Relative Humidity for operation: 0 to 95% (non-condensing)
IPM-1553-MRT
REQUEST A QUOTE
Part Number
IPM-1553-MRT Description
MAX-IP-2166-A
IPM-1553-MRT, ONE DUAL REDUNDANT, BC OR BM OR 31 RT, 16 DISCRETE, ERR INJ, IRIG-B
MAX-IP-2166-2A
IPM-1553-MRT, TWO DUAL REDUNDANT, BC OR BM OR 31 RT, 16 DISCRETE, ERR INJ, IRIG-B
MAX-IP-2162-A
IPM-1553-MRT, ONE DUAL REDUNDANT, BC AND BM OR 31 RT, 16 DISCRETE, ERR INJ, IRIG-B
MAX-IP-2162-2A
IPM-1553-MRT, TWO DUAL REDUNDANT, BC AND BM OR 31 RT, 16 DISCRETE, ERR INJ, IRIG-B
ASCB
- • Avionics Standard Communication Bus (ASCB) protocol support 4 HDLC transceivers
- • Provides simultaneous support of 128 users, a BC, as well as 4 Bus Monitors (BM)
- • Microsecond precise Tx and Rx timetags
- • Error injection and detection (CRC, Manchester, Parity)
- • 16 Discrete I/O lines (DIO) independently selectable to input/output
- • Conforms to the ASCB electrical requirements
- • Simulates the maximum number of users allowable on an ASCB databus while simultaneously providing BC and BM capabilities
- • IRIG-B input
- • Standard Operating Temperature: 0°C to 70°C
- • Relative Humidity for operation: 0 to 95% (non-condensing)
IPM-ASCB
REQUEST A QUOTE
Part Number
IPM-ASCB Description
MAX-IP-200118
IPM-ASCB mezzanine module supporting Honeywell ASCB protocol versions A, B, C1 and C2
CSDB
- • Up to 8-TX and 8-RX CSDB or Serial ASYNC RS-422 channels
- • Configurable data rate per channel between 305 bps and 4 Mbps
- • 512 ASYNC word FIFO per channel
- • Precision of one microsecond
- • Complete independent channel configuration and operation
- • Parity Error detection, configurable number of stop bits
- • 8 discrete differential lines independently configurable to input or output
- • IRIG-B signal input
- • Reliability MTBF (MIL-HDBK-217 FN2, 30 °C) 1,254,404 hours
- • Standard Operating Temperature: 0°C to 70°C
- • Relative Humidity for operation: 0 to 95% (non-condensing)
IPM-CSDB
REQUEST A QUOTE
Part Number
IPM-CSDB Description
MAX-IP-200518
IPM-CSDB mezzanine module supporting Rockwell-Collins CSDB protocol
SERIAL ASYNC RS-422
- • Up to 8-TX and 8-RX ASYNC RS422/485 channels
- • Configurable data rate per channel between 305 bps and 4 Mbps
- • 512 ASYNC word FIFO per channel
- • Precision of one microsecond
- • Complete independent channel configuration and operation
- • Parity Error detection, configurable number of stop bits
- • 8 discrete differential lines independently configurable to input or output
- • IRIG-B signal input
- • Reliability MTBF (MIL-HDBK-217 FN2, 30 °C) 1,254,404 hours
- • Standard Operating Temperature: 0°C to 70°C
- • Relative Humidity for operation: 0 to 95% (non-condensing)
IPM-ASYNC
DIFFERENTAL DISCRETE
- • 24 differential RS-422 I/O on a single size mezzanine module
- • Up to 96 differential RS-422 I/O on one single carrier board
- • Each I/O independently configurable as Input or Output
- • Each Input individually programmed to generate an interrupt on an edge or a logic level
- • 128 word FIFO buffer per line
- • 32-bit one microsecond resolution local timer
- • Two 32-bit timetag registers available to track transitions on any of the 24 I/O lines
- • IRIG-B Digital, AM and 1-PPS inputs)
- • Reliability MTBF (MIL-HDBK-217 FN2, 30 °C) 1,254,404 hours
- • Standard Operating Temperature: 0°C to 70°C
- • Relative Humidity for operation: 0 to 95% (non-condensing)
REQUEST A QUOTE
Part Number
IPM-CSDB Description
MAX-IP-200126
PM-ASYNC RS-422, 8TX+8RX, 8 DIFFERENTIAL DISCRTE I/O, IRIG-B
IPM-DIO-48
REQUEST A QUOTE
Part Number
IPM-DIO-48 Description
MAX-IP-200123
PM-DIO-48, DISCRETE MEZZANINE MODULE, 48 I/O
MAX-IP-200124
IPM-DIO-48-FIFO, DISCRETE MEZZANINE MODULE, 48 I/O, 16 words FIFO buffer per I/O line
IPM-DIO-24-DIFF
REQUEST A QUOTE
Part Number
IPM-DIO-48 Description
MAX-IP-200125
IPM-DIO DISCRETE MEZZANINE MODULE 24 I/O DIFFERENTIAL RS-422 IRIG-B INPUT
DISCRETE
- • Up to 48 Open Collector Input/Output channels on a single size mezzanine module
- • Up to 192 Open Collector Input/Output channels on one single carrier board
- • Each I/O independently configurable as Input or Output
- • Input threshold level set at 8.5 Volts with a ~1 Volts hysteresis
- • Each Output monitored by a separate input feedback pin
- • Each Input individually programmed to generate an interrupt on an edge or a logic level
- • 32-bit one microsecond resolution local timer
- • Two 32-bit timetag registers available to track transitions on any of the 48
- • I/O lines)
- • Reliability MTBF (MIL-HDBK-217 FN2, 30 °C) 1,153,800 hours
- • Standard Operating Temperature: 0°C to 70°C
- • Relative Humidity for operation: 0 to 95% (non-condensing)
Analog To Digital (ADC)
- • 16 differential or 32 single-ended inputs
- • Switch-selectable input range: ±2.5V, ±5V, ±10V, 0-2.5V, 0-5V and 0-10V
- • Software-programmable gain (per channel): 1X, 2X, 4X and 8X
- • 16-bit A/D resolution
- • 32-bit, 1 microsecond time-stamp
- • Sampling Rate:
- • 1 channel (max.): 250 KHz (4μs/conversion)
- • 16 channels (differential): 15.6 KHz (64μs/16 ch)
- • 32 channels (single-ended): 7.8 KHz (128μs/32 ch)
- • Input over voltage protection
- • With power ON: Vss –20V to Vpp 40V
- • With power OFF: Vss –35V to Vpp 55V
- • IRIG-B Digital, AM and 1-PPS inputs)
- • Reliability MTBF (MIL-HDBK-217 FN2, 30 °C) 468,917 hours
- • Standard Operating Temperature: 0°C to 70°C
- • Relative Humidity for operation: 0 to 95% (non-condensing)
REQUEST A QUOTE
Part Number
IPM-ADC Description
MAX-IP-200136
IPM-ADC ANALOG TO DIGITAL MEZZANINE MODULE, 16-BIT RESOLUTION, 32-SINGLE
OR 16-DIFFERENTIAL LINES
